Mr. Mehtab Khan (Partner)


Mr. Feroz Khan (Partner)



L-89, Krishan Vihar, Near Bharat Shakti Public School, Delhi - 110086, India


  • Home
  • /
  • Homogenizers
How the High Shear Mixers Works

Microtech Engineering manufacture high shear homogenizer for works on the principle of the high centrifugal force produced due to the high rpm of the rotor mounted on the main spindle and thus producing a very high shear due to the specially designed minimal tolerance between the rotor and stator. High shear homogenizer is homogenizing the feed particle into the fine droplet size and the degree of homogenization is very effective and capable for the diverse products such that creams, lotion, flavor emulsion, dispersion of fine particles, blending of semi –liquid, dissolving, pasteurization, etc.

Microtech Engineering makes high shear mixer homogenizer which are characterized and acceptable by their flexibility, economically, technically as well as safety aspects. It works in a minimal tolerance between rotor and stator which provides much more fine results.

Features And Advantages
  • The exceptionally rapid Microtech Engineering Homogenizers mixing action substantially reduces process time compared with conventional agitator and mixer and can reduce mixing time by up to 90%.

  • The advantage of the Microtech Engineering Homogenizers approach to mixing is that any one machine can perform the duties that in the past may have required several different pieces of process equipment. Unrivaled versatility allows any machine to be adapted to perform the widest range of mixing application, mixing ,emulsifying ,homogenizing ,disintegrating ,dissolving, dispersing, blending, particle size reduction and De-agglomeration.

  • As the Microtech Engineering Homogenizers In Line mixer and the associated vessel and pipe work form a closed system ,the mixing process is completely aeration free. This is particularly important for application where air entrainment creates a problem.

  • In -Line mixers provide a high volume centrifugal pumping action which in most cases will be sufficient for the process requirements without the need for auxiliary pumps .If due to viscosity ,vertical head or pipe line losses ,the in line mixers output falls below the required figure it may be supplemented by the insertion of an auxiliary pump into the system without reducing the efficiency of the mixer

  • The Microtech Engineering Homogenizers In – Line mixer designed makes it physically impossible for any materials -liquids or solid-to pass from the inlet to the outlet without being subjected to intense mechanical and hydraulic shear as they pass through rotor /stator work head. By passing is impossible.

    As per desired product requirement the three of the homogenizer manufactured, which provide high shear rates in the process that homogenize the product to the required uniformity.